Miniaturautos - nicht Modellautos
Carpassion.com - News, Informationen, Fahrberichte und Forum rund um Sportwagen
Login
Jetzt neu anmelden
Jetzt neu anmelden...
Europas grosse Community für Fans und Eigentümer von Sportwagen.

Firmenverzeichnis
Jetzt kostenlos eintragen!
Firmen aus den Bereichen Automobile, Luxus und Lifestyle präsentieren sich auf Carpassion.com

CPwiki Lexikon
Kurz angeschnitten
Wem ein straßenzugelassener Pagani Zonda F zu langsam ist, der erhält jetzt von der italienischen...


Kürzlich bedankte Beiträge

THEMA:

Miniaturautos - nicht Modellautos

Antwort
Alt 03.06.2005, 10:47   #1 (permalink)
 
Mitglied seit: 21.07.2003
Ort: Berlin
Beiträge: 4.729

Status: e-Wald
Miniaturautos - nicht Modellautos

Hallo.

Ich kann mich dunkel erinnern, dass es vor vielen Jahren mal einen Artikel im Stern oder Focus gegeben hat, in dem über einen Bastler berichtet wurde, der kleine Ausgaben von Ferrari etc. baut.

Das Ganze etwa so im Massstab 1:5 und mit FUNKTIONSFÄHIGEN 12 ZYLINDER MINIATURMOTOREN, DIE SOGAR LAUFEN WIE DIE IM NORMALEN MASSSTAB

Es wurden sogar auf Details wie Zündschloss usw. geachtet, mit denen man den Motor starten konnte.

Natürlich waren die Miniaturautos zwischen 20.000 und 40.000 Euro teuer.

(Weiss es nicht mehr genau)

Hat jemand hier eine Website oder eine Kontaktadresse ?

Habe beim googeln keinen Erfolg gehabt.

Vielen Dank für Infos.


Gruss Telekoma
Telekoma ist offline   Mit Zitat antworten
Anzeige
Alt 03.06.2005, 10:50   #2 (permalink)
Moderator
 
Benutzerbild von CountachQV
 
Plus-Mitglied
Mitglied seit: 06.12.2001
Ort: Schweiz
Beiträge: 11.659
Ich kenne solche Autos im Masstab 1:2, da wurden Countach und Testarossa gebaut, mit Rasenmähermotor immerhin 40kmh schnell.

1:5 gab es mal den Sauber C? aber nicht lauffähig, ein reines Standmodell.

Ich nehme an du suchst nicht ein RC:
http://www.rc-walser.ch/F-1Sauber.html

Ansonsten guck mal hier: http://www.modellautohomepage.de/linksa.htm

Enzo in 1:5 http://www.modellautohaus.de/product...ducts_id=13937
CountachQV ist offline   Mit Zitat antworten
Alt 03.06.2005, 11:19   #3 (permalink)
 
Mitglied seit: 15.12.2003
Ort: Berlin
Beiträge: 770
Hallo,
ich habe den Artikel auch gelesen. Das waren echte Autos, nur in kleinem Maßstab, mit echten 12 Zylinder Verbrennungsmotoren, wie beim Original.
Ich habe mal gegoogelt aber nichts dazu gefunden.

@CountachQV: Er meint nicht die "normalen" RC Cars und auch nicht die Modellautos. Es ist wie ein Modellauto, nur das man den Motor auch laufen lassen kann.

Gruß Hendrik
HSCOOL ist offline   Mit Zitat antworten
Alt 03.06.2005, 13:53   #4 (permalink)
 
Mitglied seit: 21.07.2003
Ort: Berlin
Beiträge: 4.729

Status: e-Wald
@HSCOOL

Genau die meinte ich.

Es scheint aber wirklich nichts im Web auffindbar zu sein.

Ich werde mal die Redaktion von Stern und Focus anschreiben.


Gruss

Telekoma
Telekoma ist offline   Mit Zitat antworten
Alt 04.06.2005, 20:01   #5 (permalink)
 
Mitglied seit: 03.05.2004
Ort: Aschaffenburg
Beiträge: 382
davon hatte ich mal ein video, leider ist das irgendwann mal bei ner formatierung untergegangen
Gotcha_ ist offline   Mit Zitat antworten
Alt 06.06.2005, 18:31   #6 (permalink)
 
Mitglied seit: 21.07.2003
Ort: Berlin
Beiträge: 4.729

Status: e-Wald
Jaaaa....! Da haben wir ja im eigenen Forum etwas, was mich an dem Thema hauptsächlich interessiert!

Miniatur V8, R4 und sogar VTwin Motoren http://www.carpassion.com/de/forum/v...amp;highlight=

Hoffe es klappt mit dem Link. ansonsten schauen bei Videos unter V8 Sound ;-) .

Sogar mit Kompressor!!!

Faszinierend...
Telekoma ist offline   Mit Zitat antworten
Alt 09.01.2006, 16:48   #7 (permalink)
 
Mitglied seit: 21.07.2003
Ort: Berlin
Beiträge: 4.729

Status: e-Wald
Immer wieder nett....


http://videos.streetfire.net/Player....43E1D136A9&p=0
Telekoma ist offline   Mit Zitat antworten
Alt 10.01.2006, 15:59   #8 (permalink)
 
Mitglied seit: 14.12.2004
Ort: bayreuth
Beiträge: 760
ist das geil! so einer will ich auch auf mein wohnzimmer schrank!
dimimix ist offline   Mit Zitat antworten
Alt 10.01.2006, 16:36   #9 (permalink)
 
Mitglied seit: 10.11.2005
Ort: Saarland - Saar/Pfalz Kreis
Beiträge: 413
Zitat:
Zitat von Telekoma
Hallo.

Ich kann mich dunkel erinnern, dass es vor vielen Jahren mal einen Artikel im Stern oder Focus gegeben hat, in dem über einen Bastler berichtet wurde, der kleine Ausgaben von Ferrari etc. baut.

Das Ganze etwa so im Massstab 1:5 und mit FUNKTIONSFÄHIGEN 12 ZYLINDER MINIATURMOTOREN, DIE SOGAR LAUFEN WIE DIE IM NORMALEN MASSSTAB

Es wurden sogar auf Details wie Zündschloss usw. geachtet, mit denen man den Motor starten konnte.

Natürlich waren die Miniaturautos zwischen 20.000 und 40.000 Euro teuer.

(Weiss es nicht mehr genau)

Hat jemand hier eine Website oder eine Kontaktadresse ?

Habe beim googeln keinen Erfolg gehabt.

Vielen Dank für Infos.


Gruss Telekoma
Hallo erstmal,
ich glaube das von Dir angesprochene Modell ist der von Pierre Scerri gebaute Ferrari 312 PB im Maßstab 1:3. Er hat nen funktionsfähigen 12 Zylinder Motor, ein 5-Gang Getriebe usw., alles funktioniert wie beim Original. Eigentlich ist es ein richtiges Auto nur 3x kleiner! Die Bauzeit betrug 25.000 Stunden und mit dem Verkauf des Prototyps sollten die restlichen 10 Fahrgestellnr. finanziert werden. In dem Buch "Ferrari Modelle-alle Masstäbe und Typen" aus dem HEEL Verlag ist das Modell abgebildet. Desweiteren war mal ein Bericht darüber in der deutschen "Ferrari World" und in einem Clubmagazin des "Ferrari Model Club"!
Gib bei google "pierre scerri" ein und dann wirst Du fündig!
deltaevo2 ist offline   Mit Zitat antworten
Alt 10.01.2006, 16:42   #10 (permalink)
 
Mitglied seit: 21.07.2003
Ort: Berlin
Beiträge: 4.729

Status: e-Wald
grossen Dank an Dich, Deltaevo2

Jetzt hat auch Google angeschlagen !

Zitat:
There are few if any models in the world to rival the Ferrari 312PB built by Pierre Scerri of Avignon, France. This 1:3 scale marvel is the real thing in every sense, from its operating 12-cylinder engine to the exact scale operating Ferrari gauges which are calibrated precisely to indicate rpm, oil pressure, water temperature and oil temperature.

It took Pierre 15 years and more than 20,000 hours to build this car. He learned to make glass so he could make the exact pattern lens for the operating headlights. He learned to make rubber so he could mold his own tires. His computer mainframe design background with the French telecommunications system allowed him to duplicate the Ferrari electronics system in exact miniature. It also provided him with the understanding needed to make a 1/3 scale operating fuel injection system identical to that in the full-size Ferrari.

Perhaps the toughest aspect of the car was the gearbox, for which Ferrari supplied drawings. While Pierre had an understanding of the object to be built, he lacked the very expensive specialized equipment required to build high-tolerance gears and synchros. Colleti, the builder of the full-size car’s gearbox ended up building the model’s gearbox.

There is no sign of deviation from the real car in terms of replication. The spark plugs are miniatures, the radiators were hand-built to the exact same core design as the real ones. Even the water reservoir fill cap is a Fiat radiator cap made exactly the same way as the real one and pressure tested. The suspension is exact and the hydraulically controlled brakes from the brake pedal have quick-change brake pads just as on the real car.

If you were 1:3 scale, you would open the door of the car, get in, fasten your seat belt as on the full-size car, take you Ferrari key (engraved identically to the real key) and put it into the ignition.
You would flip the toggle switch for the fuel pumps, and with this you would hear the fuel-injection system come to life, powered by a real scale battery built by Pierre. A crew member would stick the hand-held scale starter into the rear transaxle housing and as the engine turned over you would flip the ignition toggle switch and the 12-cylinder engine would come to life with a sound you’d never forget.

This 12-cylinder engine just isn’t any 12-cylinder engine, it is a 1:3 scale Ferrari 12-cylinder engine with the same beautiful sound. It took Pierre six months of running the engine on his own dynamometer to tune the header pipes so they would give off the same sound value as he had recorded from the engine of the real car. Once Pierre had the engine bolted together for the first time, it started on the very first try and, since then, has logged more than fifty hours of running time with no failures or refusals to start (It’s probably more reliable than the real engine).

In short, this model car is so incredible that one has a very difficult time focusing on the fact that it is a model and not a full-size car. Pierre has begun work on a 1:3 scale Ferrari P4. We’ll keep you updated.
Quelle:
www.fineartmodels.com



























RESPEKT !!!!

Geändert von Telekoma (10.01.2006 um 16:54 Uhr)
Telekoma ist offline   Mit Zitat antworten
Antwort


Ähnliche Themen
Thema Autor Forum Antworten Letzter Beitrag
Modellautos 1:87 Hyrican Modellautos 52 10.09.2004 14:18
LED-Lichter für Modellautos Showmaster Modellautos 2 25.07.2004 12:44
Umbau von Modellautos Tonardo Modellautos 2 27.04.2004 16:56

Themen-Optionen
Ansicht



Alle Zeitangaben in WEZ +1. Es ist jetzt 05:38 Uhr.

Carpassion.com Logo
© 1996-2010 by Carpassion.com. Alle Rechte vorbehalten. Carpassion ist eine eingetragene Marke.