Jump to content
EUROPAS GROßE
SPORTWAGEN COMMUNITY

Neuer 3er: Anzeige Kühlmittel-Temperatur?


PERO33

Empfohlene Beiträge

Jetzt registrieren, um Themenwerbung zu deaktivieren »

gibt nur noch eine art chekliste, durch die man sich "durchdrücken" kann.

muss gleich mal schauen, ist glaub ich nur allg. check, ölfüllstand..

bzgl. warmfahren: im drehzahlmesser (wie auch beim E60) wird angezeigt ob der motor warm ist, aber eine öltemperaturanzeige ersetzt es auch nciht, an tagen über 20 grad ist eigentlich immer die maximaldrehzahl sofort nach dem start freigegegben

ne schön wärs. ich liebe diese leuchtbalken vom m3.

sind nur so weiße striche die dann mit wärmer werdendem motor nach und nach verschwinden.wie gesagt das problem ist wie ich oben beschrieben habe.

wie ist es beim m3? wahrscheinlich nicht so schlecht gelöst.

öltemperaturanzeige gibt es wie so oft weder für geld noch gute worte. :-(((°

zumindest nicht von bmw selbst.

Beim M3 sind die Dinger im Drehzahlmesser auch nur Show.

Wenn´s nach denen geht kann man den kalten Motor schon bis 5500 1/min drehen.

Aber zum Glück hat der Emmi wenigstens eine Öltemperaturanzeige. :D

  • 3 Wochen später...

Die Begrenzung beim E90 ist nur Show ... beim E60 ist se wirklich variabel und Du siehst bis wohin Du drehen kannst/darfst/sollst - ob es aber wirklich sinnvoll ist, nen eiskalten Motor schon bis 5000 hochzujubeln, sei dahingestellt.

es gibt im neuen 3er, wie auch im 5er und im 1er ein geheimmenu im bordcomputer.

man kommt dort hinein wenn man ca. 15 sek. auf den kilometer- reset knopf drückt.

dann muss man bestimmte zahlen drücken etc.

hier mal die erklärung auf englisch, hab sie leider nicht auf deutsch.

For 'navigation' in the menu's, use the 'mileage reset button'.

To get IN the menu's push that button for approx. 15 sec.

Keep it pressed until you get the "01.__" in the display between the

RPM and speedo-meter.

"XX.YY" means the menu-numbers.

If you want increase the "XX" part, push the 'mileage reset' button for

approx. 2 sec.

As soon as you see "XX.__", you can increase XX by pressing the

'mileage reset' button.

Every 'push' increases "XX". If you want to increase the "YY", when the

display shows,

for exmaple "01.00", then every 'push' on the 'mileage reset', will

increase the "YY" value.

01.00 FGSTNR = "Fahrgestellnummer" (Chassisnumber)

01.01 K-ZAHL W/T

01.02 BMWTNR

01.03 COD DIA

01.04 KI HSTL DATUM = "Herstellungs Datum" (Manufactored/Essembled

on date...)

01.05 ???

01.06 SW

01.07 KODIERDATEN

01.08 CAN

02.00 KI TEST = Dashbord test. All light, gauges, displays and so on will light up,

move.... works only when the engine is NOT running.

03.00 ??? (maybe it will show something after your first 'service', motoroil change)

04.00 MOM VBR = actual fuel consumption

04.01 RW-VBR-MOM = fuel consumption per hour

05.yy average fuel consumption

06.00 how much you have in your 'tank' in liters. Left- and Right compartment and Total

06.01 dito in hex?

07.00 KTMP-MOM = Temp. Cooling Fluid (celcius)

07.01 ATMP-MOM = "Aussentemperatur" Temp. Outside (celcius)

07.02 dito in hex?

07.03 N-MOT-MOM = RPM

07.04 N-VWF-MOM = max. RPM at the moment. E60 it gives a vlaue. E90 it shows "-----"

08.00 V-EFF = exact speed

08.01 V-ANZ = "Anzeige" speed shown on dash..

08.02 V-SZ

08.03 D-GESCHW 1 WEG

08.04 D-GESCHW 1 ZEIT

08.05 D-GESCHW 2 WEG

08.06 D-GESCHW 1 ZEIT

09.00 Voltage

10.00 KM/WOCHE

11.00 ??? , has to do how the time will be displayed

11.01 km or miles

11.02 Celcius or Fahrenheit

11.03 how to display fuel consumption. km/l or l/100km or mpg

12.00 V-ANKUNFT = arrival time 12.01 ANK-ZEIT = time of arrival

13.00 AUDIO = all(?) sounds. Like the 'boing' of the 'light on warning'

14.00 FS EINTRAEGE = error messages (if any)

15.00 Oil temp??

16.00 Dashbord lighting.

17.00 Temp inside in the car??

18.00 CC-TEST = you can see some of the 'check control' messages.

Look also at the iDrive screen!

19.00 UNLOCK

20.YY to 23.YY ???

That UNLOCK stuff is also important.

If not UNLOCKed, you can only see menu's 01 and 02.

In the '19' menu you must 'click-in' a unlock code.

That code you can calculate from the "FGSTNR" number.

You must add the last 5 figures of that FGSTNR number. for example:

: XXXXXX12345 the unlock code will be: 1+2+3+4+5=15

20.YY to 23.YY There is more to discover......

USE AT YOUR OWN RISK!

gruß,

bmwracer

es gibt im neuen 3er, wie auch im 5er und im 1er ein geheimmenu im bordcomputer.

man kommt dort hinein wenn man ca. 15 sek. auf den kilometer- reset knopf drückt.

dann muss man bestimmte zahlen drücken etc.

hier mal die erklärung auf englisch, hab sie leider nicht auf deutsch.

For 'navigation' in the menu's, use the 'mileage reset button'.

To get IN the menu's push that button for approx. 15 sec.

Keep it pressed until you get the "01.__" in the display between the

RPM and speedo-meter.

"XX.YY" means the menu-numbers.

If you want increase the "XX" part, push the 'mileage reset' button for

approx. 2 sec.

As soon as you see "XX.__", you can increase XX by pressing the

'mileage reset' button.

Every 'push' increases "XX". If you want to increase the "YY", when the

display shows,

for exmaple "01.00", then every 'push' on the 'mileage reset', will

increase the "YY" value.

01.00 FGSTNR = "Fahrgestellnummer" (Chassisnumber)

01.01 K-ZAHL W/T

01.02 BMWTNR

01.03 COD DIA

01.04 KI HSTL DATUM = "Herstellungs Datum" (Manufactored/Essembled

on date...)

01.05 ???

01.06 SW

01.07 KODIERDATEN

01.08 CAN

02.00 KI TEST = Dashbord test. All light, gauges, displays and so on will light up,

move.... works only when the engine is NOT running.

03.00 ??? (maybe it will show something after your first 'service', motoroil change)

04.00 MOM VBR = actual fuel consumption

04.01 RW-VBR-MOM = fuel consumption per hour

05.yy average fuel consumption

06.00 how much you have in your 'tank' in liters. Left- and Right compartment and Total

06.01 dito in hex?

07.00 KTMP-MOM = Temp. Cooling Fluid (celcius)

07.01 ATMP-MOM = "Aussentemperatur" Temp. Outside (celcius)

07.02 dito in hex?

07.03 N-MOT-MOM = RPM

07.04 N-VWF-MOM = max. RPM at the moment. E60 it gives a vlaue. E90 it shows "-----"

08.00 V-EFF = exact speed

08.01 V-ANZ = "Anzeige" speed shown on dash..

08.02 V-SZ

08.03 D-GESCHW 1 WEG

08.04 D-GESCHW 1 ZEIT

08.05 D-GESCHW 2 WEG

08.06 D-GESCHW 1 ZEIT

09.00 Voltage

10.00 KM/WOCHE

11.00 ??? , has to do how the time will be displayed

11.01 km or miles

11.02 Celcius or Fahrenheit

11.03 how to display fuel consumption. km/l or l/100km or mpg

12.00 V-ANKUNFT = arrival time 12.01 ANK-ZEIT = time of arrival

13.00 AUDIO = all(?) sounds. Like the 'boing' of the 'light on warning'

14.00 FS EINTRAEGE = error messages (if any)

15.00 Oil temp??

16.00 Dashbord lighting.

17.00 Temp inside in the car??

18.00 CC-TEST = you can see some of the 'check control' messages.

Look also at the iDrive screen!

19.00 UNLOCK

20.YY to 23.YY ???

That UNLOCK stuff is also important.

If not UNLOCKed, you can only see menu's 01 and 02.

In the '19' menu you must 'click-in' a unlock code.

That code you can calculate from the "FGSTNR" number.

You must add the last 5 figures of that FGSTNR number. for example:

: XXXXXX12345 the unlock code will be: 1+2+3+4+5=15

20.YY to 23.YY There is more to discover......

USE AT YOUR OWN RISK!

gruß,

bmwracer

das kann doch wohl nicht sein, dass ich mich bei einem 30.000€-Auto durch ein "Geheimmenü" im Bordcomputer kämpfen muss, um eine Öl-Temperaturanzeige zu bekommen. Schade BMW, aber so wird das mit uns beiden nichts mehr. Das ist einfach unglaublich. :evil:

Archiviert

Dieses Thema ist archiviert und für weitere Antworten gesperrt. Erstelle doch dein eigenes Thema im passenden Forum.


×
×
  • Neu erstellen...