Help me create a US RS6 sedan!

[GIR]

Bring your Audi to MTM and they'll uncap it and tune it for you.
http://www.mtm-online.de/index_en.htm

also check these out:
http://www.mtm-online.de/html/mtm/video/clips/rs6.html
http://www.mtm-online.de/html/mtm/video/clips/s4.html
http://www.mtm-online.de/html/mtm/vi...ips/rs4_2.html
These movies were ofcourse made with a profesional driver, but they show you how good the quattro preforms.

http://www.mtm-online.de/html/mtm/vi...ps/nardo1.html
http://www.mtm-online.de/html/mtm/vi...ps/nardo2.html
Audi TT with 2 engines!! 371 KM/H!! Ice in the air intake!!


Oh izzyloveslizzy just to make you feel better:
<thepolarfoxqx: c'mon now, if you want to insult the US, fine, just don't use offensive language>

[izzyloveslizzy]

Yeah but I don't want to get into a heated "insult-fest" with anyone. And besides there would be many other reasons to insult the U.S..... I could go on and on forever, and even if I felt like insulting the U.S. there would simply be too many things to say and too little time! :P

Anywho Fox is a cool guy, and just because he made one comment doesn't really mean anything. I respect the guy and I'm not gonna insult anyone on a forum when it has nothing to do with the forum's topic.

Anyhow, I'd like to get back to normal car discussions (unless anyone else has any comments to make about that). we'll leave the insults for someone who deserves to be insulted.

[thepolarfoxqx]

yeah, i live in minnesota, which is, more or less, american canada.

I was poking fun at that you don't get nice cars like RS6.

That and the whole ending sentance with "eh" thing.

[izzyloveslizzy]

Which sentence did I end with "eh", eh? LOL! Anyway I think you need to come up here and see what Canada's like, first.

And so what that we don't get the RS6 (actually I admit it sucks), but you could modify the car's "bumpers" a bit and take it to the road! Heheh! Besides it's not like I'd ever buy an RS6 (I don't think). If I was gonna a buy a crazy Audi I'd go for the S3, the Avantissimo, or the Pikes Peak, or an S8. Maybe even an S6 or S4. And if you saw the picture of the Audi TT "LowRider", I think I'd go for something like that too! (If it was ever made).

[thepolarfoxqx]

Hey! Don't Make me come up there!!!

[izzyloveslizzy]

LOL! Hehe! Don't make ME COME DOWN THERE! Actually in all seriousness if you ever decide to come up here for a visit you're most welcome. I'll show you around the place. I'd gladly welcome a visit by anyone. Roland was etlling me he may come to Vancouver again and I told him the same thing. You're all welcome. Hehe, almost sounds like I own the city or something, eh! Oops, there I go again.

[awol]

There are some facts that have been over looked in your conversation:

The 2.7t does not have the wide body kit already on it as does the 4.2...a fact that would run around 3000 US to relieve.

Also, the 4.2 has 300 HP compare to the 250 of the 2.7t. The $.2 has been in the Audi S cars from as early as the mid 90's only in Europe in the S4 and S6. It is easily modified.

However, it does not come with a manual transmission option. I fact that I am not sure can be remedied but believe it should be.

The 4.2 is heavier by a two to three hundred pounds.

Finally, I have seen all of these cars. The 4.2 is beautiful with it's flare treatment and most resembles the Rs6. The 2.7t is a sleeper and looks a little like 'mom's audi'.

Well I hope this helps.

[bleh]

the post was dead. but its alright. audis 2.7t is indestructable. i would take 2 turbos over to more cylinders anytime.

[djfux69]

www.audiworld.com

chip- giac x(93 octane, will self tune until 98 octane) if you get big turbos go with the giac xr or xrr. they are both 100 octane programs, but with big turbos, and more fuel you can run them on 93.
exhaust- pick one
clutch- i say oem rs4 because they are having serious problems wit the SPEC clutches right now
turbos- ko4/16 its a regular ko4 hotside, with a k16 compressor wheel.
lightning green top injectors
if you have a hitachi maf then you woul use an 03 cobra maf, bosch you need a 745 maf

you now have yourself a homemade 500+hp kit.



*edit* holy crap.... this post is from soo long ago, i feel like such a noob.
i saw it at the top of the list, i figured it was new-ish. i didnt go digging for it. i forgot there isnt a lot of traffic on this site ops: